Job is more than three months old.
Job Details
Posted date: Aug 21, 2024
Category: All Hourly Unions
Location: Algona, WA
Description
At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.Boeing Commercial Airplanes has an exciting opportunity for a Ducts and Reservoir Assembler to join our team in Algona, WA.
As a Ducts and Reservoir Assembler you will play a crucial role in preparing, fitting, aligning, and assembling components for welding or swedging. The successful candidates will be responsible for working with a variety of assemblies, many of which will be sent to the final assembly area for the installation of additional components such as fittings, brackets, insulation, and part marking. These duct assemblies will then be installed on aircraft or incorporated into larger assemblies that are subsequently installed on airplanes.
Employment in this position also requires handling, standing, use of low impact vibratory tools, walking, lifting and carrying less than 10 pounds, rotation of head/neck, flexion/extension, contact with metals, exposure to noise and atmospheric conditions, and the use of personal safety gear for face/eye, hand/arm, ears and feet.
Position Responsibilities
Obtain and verify kitted (pre-picked) detail parts, standards and assemblies were issued correctly by comparing part numbers and quantities to Work Order (W/O) and/or Bill Of Material (BOM) on drawing(s).Ensure that parts issued are effective for the airplane and are free from visible defects and that tools received are the same as those listed on W/O and are effective for the assembly being built.Obtain appropriate engineering drawing(s) for assigned job if drawings are not with order.Initiate planning or engineering change requests for pre-planned jobs, as required.Set up assembly tools per tooling instructions or drawings.Make sure all locators are correct for particular model configuration.Hand fit parts by setting them up in weld or other types of jigs using table vise, drill press vise, hand clamps, hose clamps, clecos, rounding rings, Miscellaneous Tools (MIT’s) and Standard Tools (ST's). Prepare detail parts by scribing trim lines, making rough cuts, sanding, grinding or trimming parts to remove excess material, tapping out dents, expanding (sizing), swaging, beading, and deburring as necessary, using tools such as band saws, disk grinders, nibblers, expanders, and cone sanders.Deliver fitted details to weld area to be welded.Select drills, reamers, and or countersinking tools for pilot and full size holes per drawings or work order.Drill and/or ream holes in parts, assemblies, in proper sequence and to correct size (per drawing requirements) using tools such as drill motor, reamer, Winslow, 90-Degree Power Vane, or Quackenbush. Disassemble parts and de-burr holes using chip chasers, de-burring tools, and files to prepare for installation of fasteners.Apply sealant, alodine, primer, adhesives, or special finishes as required by work order, drawing, or Boeing Aerospace Company Process Specifications (BAC specifications). Handle and dispose of hazardous materials (e.g., paints and sealant) in approved manner using personal protective equipment.Determine and obtain correct type and size fasteners from roto-bin (e.g., hi-locks, rivets, bolts, nuts O-rings, and fittings), per drawing, work order, BAC specifications.Install detail parts and fasteners in correct sequence per work order using correct tools (e.g., rivet gun and bucking bar, lock bolt puller, power screwdriver, torque wrench, C-squeeze, riveting machine, ratchet wrench).Sell in-process checks, (e.g., fit checks, torque, pressure test, OK to close) to inspection as required.Attach insulation to duct assemblies as required.Check work after completion of each operation in job, and check completed job to ensure it is complete per drawing and that there are no defects.Put completed job or reworked job up for inspection as required.Maintain personal and tool certifications, as required.Contact lead/supervisor when assistance is needed (e.g., if there are questions about drawings or paperwork, if drawings and paperwork do not match, if parts do not fit or are not appropriately configured, or when any other problem arises).
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications (Required Skills/Experience):
1+ years of experience working with powered hand toolsExperience working with precision measuring toolsBasic computer experience and competencyExperience working with detailed work instructions or reading and interpreting blueprints and drawingsPhysically able to lift 35 or more pounds during a shiftFluent in oral and written English
Typical Education & Experience
High school graduate or GED preferred.
Relocation
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Shift Work Statement
This posting can support various shifts
Union Representation Statement
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Other Relevant Information & Requirements
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary Pay Range: $19.00 - $42.55 an hour
Applications for this position will be accepted until September 15, 2024
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Check out other jobs at Boeing.